Korg Poly-61 Patch Bank | 64 new patches

64 brand new patches for the Korg Poly-61. Perfect for Italo Disco, Pop, Soundtracks and many other genres.

Unpolished and raw sounds.

This is a tape-load download.

How to install:

- Download the zip-file “Espen Kraft Poly-61 patches” and unzip it

- Transfer the Wav-file to your phone, computer or device that has an audio output jack

- Connect an audio cable from the device into the jack labelled "FROM TAPE" on your Poly-61 (on the rear)

- Set the switch "FROM TAPE" to HIGH or LOW depending on the output level from your device

- Set the switches "WRITE" and "TAPE" both to ENABLE

- Press the LOAD button on the Poly-61

- Start the device and play the audio file "Poly-61 EK"

- If LOAD was GOOD, the display will say so, if not it will say ERR (Er r), then you must try again with different settings

- Set the "WRITE" and "TAPE" back to DISABLE when the patches has been transferred successfully

Check operators manual, downloadable online. The switch HIGH or LOW is key here.

The Audio file is verified to work from a phone with volume at maximum and the switch set to LOW

If all fails you can use the supplied patch sheet and input the parameters yourself the old school way.

Don't forget to save (WRITE) All patches you have from before will be erased if you load in my new set. Y

ou should save your patches if you wish to keep them!